non-dimensional mass造句

• The results indicate that : the high positioned air inflow do good to heat transfer in rotator disk ; different size of radial outflow have small effects on flow and heat transfer ; the heat transfer near rotating disk increases as rotating reynold number increases or non - dimensional mass flow rate increases
  结果表明，高位轴向进气对转盘换热有利；不同的径向出口大小对盘腔内的流动换热影响不大；随旋转雷诺数和无量纲质量流量增加，转盘盘面的换热效果增强。
• By comparing the results with relative experiment data , it is shown that rng k - is more exactly than the other turbulent model . . 2 ) the influences of axial inflow position , radial outflow size , rotating reynold number , non - dimensional mass flowrate and axial inflow angle on the flow and heat transfer characteristics were numerically investigated for a typical rotator - stator cavity with axial inflow , radial inflow and radial outflow . the correlations for average nusselt number vs rotating reynold number or non - dimensional mass flowrate were established
  ( 2 )针对一典型的径向、轴向进气，径向出气的转-静盘腔结构，系统研究轴向进气位置、径向出口大小、旋转雷诺数、无量纲质量流量和轴向垂直预旋进气等对盘腔内流动和换热的影响，整理出转-静盘腔内转盘平均努谢尔数与旋转雷诺数无量纲质量流量之间的准则关联式。
• 3 ) a custom filed function module was complied to study the influence of non - dimensional mass flowrate changed with time in stair shape on flow and heat transfer inside rotator - stator cavity with axial inflow and radial outflow . average nusselt number takes on a sharp up - down process when the mass flowrate changes from stabile status as to the following change of flowrate , the average nuselt number changes greatly in the initial stage and then changes gradually
  ( 3 )自编用户程序模块，研究在轴向入流、径向出流的转-静盘腔中，无量纲流量随时间呈阶梯型改变对盘腔流动和换热的影响。当流量从某个稳定状态改变时，转盘上的平均努谢尔数会产生一个明显的上升再降低过程；在每一次流量改变的初始阶段，平均努谢尔数存在一个较大幅度的变化。
• 4 ) in a pre - swirl rotator - stator cavities with discrete pre - swirl nozzles and blade - cooling entry holes , the influences of pre - swirl angle and flow parameter on the flow and heat transfer characteristics were numerically investigated . the correlation for average nusselt number vs rotating reynold number or non - dimensional mass flowrate were established . the results show that : advantage of per - swirl inflow is the effect of cooling the blade - cooling entry holes ; pre - swirl inflow increases heat transfer in rotating disk of pre - swirl chamber ; as pre - swirl angle increases , local nusselt number decreases in pre - swirl chamber ; the temperature of stator of inner rotator - stator chamber and per - swirl chamber decreases as rotating reynold number increases ; when the axial mass flowrate maintains constant , heat transfer in the rotating disk of inner rotator - stator cavities does n ' t change as per - swirl mass flowrate increases , while heat transfer in the rotating disk of per - swirl chamber increases ; when the pre - swirl mass flowrate maintains constant , change of the axial mass flowrate has effect on the whole cavity
  结果表明，预旋进气的优点在于增强了叶片冷却孔附近的对流换热效果，局部努谢尔数随预旋角的增大而有所减小；随旋转雷诺数的增加，不论是内转静腔室还是预旋腔室的静盘上的温度都不同程度的降低：当轴向中心进气质量流量不变时，随预旋进气的质量流量增加，内转静腔室的转盘盘面上的换热基本没有变化，而预旋腔室的转盘盘面上的换热效果增强；当预旋进气质量流量不变时，轴向中心进气的质量流量的改变对整个盘腔都有影响。